12.5 15.3 1.2 3.3 5.08 5.08 7.25 3.2 6.0 4.9 2.54 0.5 square + 2.57 ?2.80 2.54 5.08 x y z red anode for red/green bi-colour ssa 187/l series 3 tier 3mm led assembly the ssa 187 series is a family of display devices using a black nylon 6 ul -94vo rated housing to mount three 3mm leds at right angles to a pcb. the pin out is in line on 0.1? . in any one batch the leds are lumenous intensity matched. ? accurate alignment of leds. ? low current and high brightness available. ? unique baseplate for accurate lead positioning. ? matched leds. ? blue also available. ? near equivalent to dialight 564-0x20-xxx mechanical data bedford opto technology ltd 1 biggar business park, bi ggar,lanarkshire, ml12 6fx tel: +44 (0) 1899 221221 fax: +44 (0) 1899 221009 website: bot.co.uk e-mail: bill@bot.co.uk iss c 14.3.06 page1 of 3 pb this component is rohs compliant
bedford opto technology ltd 1 biggar business park, bi ggar,lanarkshire, ml12 6fx tel: +44 (0) 1899 221221 fax: +44 (0) 1899 221009 website: bot.co.uk e-mail: bill@bot.co.uk ssa 187 absolute maximum ratings (t a = 25 o c) parameter red soft yellow green pure red forward current 30ma 30ma 30ma 30ma 30ma 3oma power dissipation 100mw 100mw 100mw 100mw 100mw 100mw reverse voltage volts 6 6 6 6 6 10 a operating temperature -40 c to +100 c -55 c to 100 c 260 c storage temperature lead soldering temperature for 5sec (2.0mm from body) colour lumenous intensity if = 10ma mcd peak wave- length nm viewing angle degrees forward voltage if = 20ma volts red min typ 6.3 10 - 635 - 60 2.0 yel- low min typ 6.3 10 - 585 - 60 2.4 green min typ max 6.3 10 - 565 - - 60 - 2.4 3.0 pure green min typ max 1.6 3.5 - 555 - - 60 - 2.4 3.0 red green bi- min typ max min typ max 2.2 @20ma 4.8 @20ma 2.2 @20ma 4.8 @20ma 630 565 200 200 2.0 2.8 2.1 2.8 soft orange min typ 1.6 4.0 605 60 2.4 opto electronic data (ta = 25 o c) ordering information SSA187xyz x = top led y = middle led z = bottom led indicate colour by using r = red o= orange y = yellow b = blank g = green pg= pure green bc=red/green bi-colour iss c 14.3.06 page 2 of 3 pb this component is rohs compliant
bedford opto technology ltd 1 biggar business park, bi ggar,lanarkshire, ml12 6fx tel: +44 (0) 1899 221221 fax: +44 (0) 1899 221009 website: bot.co.uk e-mail: bill@bot.co.uk ssa 187l absolute maximum ratings (t a = 25 o c) parameter red green yellow forward current ma 7.0 7.0 7.0 power dissipation 20mw 20mw 20mw reverse voltage volts 6 6 6 operating temperature -40 c to +100 c storage temperature -55 c to 100 c lead soldering temperature 260 c colour lumenous intensity if = 2ma mcd peak wave- length nm viewing angle degrees forward voltage if = 2ma volts red min typ 1.0 2.0 - 635 - 50 1.9 yellow min typ 1.0 2.0 - 585 - 50 2.4 green min typ max 1.0 2.0 - 565 - - 50 - 1.9 2.4 opto electronic data (ta = 25 o c) ordering information SSA187lxyz x = top led y = middle led z = bottom led indicate colour by using r = red y = yellow b = blank g = green iss c 14.3.06 page 3 of 3 low current versions pb this component is rohs compliant
|
